Lightbox Signage for Ronny’s Market, Pacific Palisades — Project Notes

Ronny's Market Liquor Deli & Grill lightbox sign, Pacific Palisades

Table of Contents

Ronny’s Market in Pacific Palisades needed a storefront sign that reads by day and glows at night without the cost of channel letters. We designed, fabricated and installed a lightbox (cabinet) sign for the market. These are the project notes, plus what you should know if you are considering a lightbox sign for your own Los Angeles storefront.

Ronny's Market lit lightbox sign at night, Pacific Palisades
Ronny’s Market lightbox sign at night.

What a lightbox sign is

A lightbox is an aluminum cabinet with a translucent face and lighting inside. The face is polycarbonate or acrylic with the graphics applied as translucent vinyl, so the whole sign lights evenly after dark. Modern cabinets use LED modules, which draw a fraction of the power of the fluorescent tubes used ten years ago and last for years without service.

Why a lightbox for a neighborhood market

  • Full-color graphics. A market sells with pictures and color — produce, bread, coffee. A lightbox face can carry all of it; channel letters carry only letters.
  • Night visibility. Pacific Palisades streets are quiet after dark; the illuminated face is what tells drivers the store is open.
  • Cost. For the same width, a cabinet sign is usually the more affordable illuminated option, and the face can be changed later without replacing the cabinet.
  • One-day installation. The cabinet arrives complete; installation and electrical hook-up take a day for a sign of this size.

How the project ran

  1. Site check. We measured the fascia, checked the existing electrical circuit and photographed the storefront for the design mock-up.
  2. Design proof. The market’s name and colors were laid out on a photo of the building so the owner saw the exact result before approving.
  3. Permit. Pacific Palisades is in the City of Los Angeles, so an illuminated storefront sign needs a building sign permit and an electrical permit through LADBS. We prepared the drawings and handled the applications — see our sign permit service.
  4. Fabrication. The cabinet, LED layout and printed face were built in our Pacoima shop.
  5. Installation. Our licensed crew mounted the cabinet, connected the power and tested the illumination the same day.

Lightbox or channel letters?

Choose a lightbox when you need color, imagery or a logo that would be hard to build as individual letters, or when budget matters most. Choose channel letters when the landlord or city requires individual letters (common on newer shopping centers), or when you want the more premium look. Many storefronts combine both: channel letters for the name and a small lightbox for “Open” hours or a logo mark.

Care and lifespan

An aluminum cabinet with LED modules typically runs 8–10 years before the modules need attention; the printed face can be refreshed any time the branding changes. If your existing cabinet has dark patches or flickering, that is usually a module or power-supply issue we can repair — see sign repair.

Frequently asked questions

How long does a lightbox sign take? Two to four weeks from approved design to installation for a typical storefront, most of it waiting on the permit.

Can a lightbox be double-sided? Yes — double-faced cabinets are common for signs that project from the building or stand on a pole.

Do you serve Pacific Palisades and the Westside? Yes. We install across Los Angeles from our shop in Pacoima; see our Santa Monica page for other Westside work.

Thinking about an illuminated sign for your store? Call (818) 723-4047 or request a quote and we will start with a mock-up on a photo of your building.

Related: our custom outdoor sign services in Los Angeles and outdoor sign installation pages explain how we design, permit, build and install signs like this one.

Request a Consultation

Upload Documents. PDF, TXT, DOC, DOCX are accepted file types. Limit is 5 mb